
The Device Menu
89
“Take” Menu Entry
This menu is only available when your mobile unit is checked into the Aastra 800 /
OpenCom 100 communications system, see “System” Menu starting on page 93.
Take
: You wish to take a current call from one terminal over to your DECT
telephone and continue the call on the DECT telephone. To do so, your
DECT telephone and the other terminal must have the same internal call
number.
“Time/Alarms” Menu
Use the and
navigation keys to adjust input position for all menu settings and
the and
keys to change the values.
Date/Time
Time
: displays the time currently configured on the mobile unit
Edit
: Changes time setting.
Date
: displays the time currently configured on the mobile unit
Edit
: Changes date setting.
Note:
If time and date are transmitted by the communications system, you
cannot make this setting.
Appointment
: Displays appointment list. You can enter and activate up to 3
appointments. Select an entry from the list and press the
Ok
softkey.
Status
: Switching the appointment
On
or switching it
Off
.
Edit
: Switching appointment on or off.
Time
: Displays time set for the appointment.
Edit
: Changes time setting.
Date
: Displays date set for the appointment.
Edit
: Changes date setting
Text
: Displays text entered for the appointment.
Edit
: Change/re-enter the text (32 characters max.).
Note:
If the ringer is switched off (see page 91), there is no acoustical signal
for the appointment set. Appointments can also be programmed in the
System menu
(see page 102).
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299