Commissioning
15
Battery Charge Display
The charging status of the battery is shown on the display. The following means:
■
When the mobile unit is placed on the charger with a completely discharged
battery there is no status display until a certain charge has been reached. This
process can take a few minutes and is not a defect.
■
Even when the mobile unit is switched off the battery discharges slowly.
■
While charging the LED appears orange; green when the battery is fully
charged (can be deactivated in the
>
Settings
>
Illumination
>
LED
indications
>
Life indication
menu (see page 110).
Charge Warning
When the battery capacity is nearly exhausted, you will see a warning on the
display and hear short “beep” signals as an acoustic warning (can be deactivated
in the
>
Audio
>
Attention tones
>
Battery warning
menu (see page 92)).
If you are making a call at the time, you have 5 minutes to complete the call before
the mobile unit shuts itself off.
Mobile Unit Subscription (Checking In)
Your mobile unit can be operated on a maximum of 10 different communications
systems. To do so, it has to be subscribed to each system, i.e. checked in.
The check-in procedure is usually done when commissioning the device. This is
usually done by your system administrator for you when operated on the
Aastra 800 / OpenCom 100 communications system.
Checking in is done via the following steps:
81 - 100 % charged
61 - 80 % charged
41 - 60 % charged
21 - 40 % charged
0 - 20 % charged
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299