Telephoning
70
caller is not “unparked” after some time, a callback is automatically made to your
mobile unit as soon as your device is free again. The caller is then automatically
“unparked”. If you are, however, still on another call, the caller hears the busy
signal and is thus “unparked”. The authorisation for parking connections and the
time interval until which callback takes place, is configured by the system adminis-
trator upon system configuration.
Announcements (with and without Intercom)
Announcements can be set up on single or multiple system terminals. The
“Announcement” function is available in two versions.
■
Announcement with intercom
: The microphone of the system terminal called
will be switched on (handsfree operation) and the person you are calling can
immediately answer your announcement. An announcement with intercom
can only be conducted to a single system terminal (not a group of terminals).
■
Announcement without intercom
: The called subscriber hears a special
information tone followed by your announcement. You can also make an
announcement to a group of system terminals (e.g. to a hunt group number on
which calls are signalled simultaneously). All subscribers called hear the
announcement at the same time in this case. The person initiating the
announcement hears a signal tone on his/her telephone when the
(announcement) connection has been established to all called subscribers. If
Park call
You are making a call.
Press softkey.
/
Use the navigation keys to select the
Park call
menu entry and
confirm with the
Ok
softkey. The system offers the next available
parking spot (0-9, * or #). Confirm with the
Ok
softkey.
Press the end key.
Unpark call
Press softkey when idle.
/
Use the navigation keys to select the
Unpark
menu entry and
confirm with the
Ok
softkey. Select the parked call desired from the
list offered. Confirm with the
Ok
softkey.
You will be connected with the parked caller.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299