Commissioning
16
1.
Switch on the mobile unit. To do so, press the
button.
When commissioning, the
Language
menu appears. Use the
and
navigation keys to select the desired display language. Confirm with the
softkey.
2.
When commissioning,
Subscriptions
appears on the display with the
New
system
notification. Press the
Ok
softkey to start checking in.
If you do not wish to immediately start checking in, after a few seconds
No
system
appears on the mobile unit on the idle display. In this case, press the
softkey and call the
System
>
Subscriptions
menu.
A new DECT configuration entry must be configured on the Aastra 800 /
OpenCom 100 communications system to check in the mobile unit. When the
mobile unit is to be checked in onto the communications system using the so-
called
Secured procedure
the IPEI (International Portable Equipment Identity)
of the mobile unit is required for this configuration entry (located in the
>
System
>
Show IPEI
menu).
3. Enter Authentication Code
: Enter the (maximum) 8-digit code which was
entered into the Configurator of the communications system. If no
authentication code was entered into the Configurator, no code entry is
necessary. Press the
Next
softkey.
Note
When you prefix authentication code entry with the star key, the mobile unit will
be checked in as a GAP device.
Tip:
The length and quality of the authentication code used
depends on your security requirements. Please keep in mind
that the memory required for the authentication code
increases 4 bits per additional digit.
4. Enter PARK
: Now enter the communications system PARK. The PARK (Portable
Access Right Key) identifies the communications system. You can view this
number in the communications system Configurator. Press the
Next
softkey.
If there are no other communications systems within radio range and you have
activated simplified registration on the communications system, you can
continue without entering a PARK.
The mobile unit begins checking in and displays
Subscription: Please wait
. This
procedure should be completed very quickly. If not, the entries may not be correct
or the radio connection is inadequate. In this case, cancel the procedure using the
Esc
softkey and repeat the registration with corrected entries. After completion of
checking in, the mobile unit is ready for operation.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299