Aastra 470, System Manual, Page: 96 / 250

Installation
96
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
Prefabricated system cable 12 x RJ45
The cable is 6 m long and, at one extremity, has 12 RJ45 connectors for the inter-
faces on the front panel. Two of them have 4 cores; the others, 2 cores. This means
the cable is suitable for connecting the following interfaces:
• 2 network interfaces BRI-T or 2 terminal interfaces BRI-S or a combination thereof.
• 10 terminal interfaces (DSI, FXS) or a combination thereof.
Note:
This cable cannot be used to connect Ethernet interfaces (see also "Con-
nection of PRI primary rate interface", page 104 and "Connection of Ether-
net interfaces", page 133 ).
Tip
Use standard commercial connecting cables not just for the PRI and Eth-
ernet interfaces but also for connecting the BRI-T interfaces.
3
white
2
4 x.1a
green 5 x.1b
turquoise 3 x.2a
violet 6 x.2b
4
white 1 x.3a
brown 2 x.3b
turquoise 7 x.4a
violet 8 x.4b
5
white
3
4 x.1a
grey 5 x.1b
turquoise 3 x.2a
violet 6 x.2b
6
red 1 x.3a
blue 2 x.3b
turquoise 7 x.4a
violet 8 x.4b
7
red
4
4 x.1a
orange 5 x.1b
turquoise 3 x.2a
violet 6 x.2b
8
red 1 x.3a
green 2 x.3b
turquoise 7 x.4a
violet 8 x.4b
Stranded
element
Core colour
Cable desig-
nation
RJ45 Port
Pin Two-wire connection