Aastra 470, System Manual, Page: 169 / 250

Configuration
169
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
This initialization can be achieved in the following ways:
• Using the control panel on the front panel
See "Display and control panel", page 194
• With AMS
In the AMS Configuration Manager or Fault & Maintenance Manager a First start
can be carried out under Online
/
Reset communication server . If the sales channel
is also to be modified, create a new communication server in the AMS Shell and
select a sales channel. Next
Set/change the sales channel under Tools . This exe-
cutes a first start and the country-specific default values are loaded.
Note:
To perform a first-start or a sales channel change, either a user account
with the corresponding authorization profile is necessary (see
"User
accounts and authorization profiles", page 153 ) or the local, password-
free access must be open (see "Password-free access", page 158 ).
Preparing Configuration with AMS Offline
The complete configuration of a communication system can be created on the PC
without access to the communication server and stored in the database. The pre-
pared configuration can then be uploaded to the communication server file system
(see
"Upload (AMS -> communication server)", page 165 ).
Configuration with AMS (online)
If a communication system that has already been configured is present, the config-
uration can be loaded from the configuration server in AMS and edited online (see
"Connect (Online)", page 164 ).
If the system to be configured is in the first-start state, the country-specific default
values are loaded.
See also:
Part of the configuration settings is also accessible via the System Assist-
ant function on the Office 45. A separate set of User’s Guide is available
for this.
Activating the licences
The licence information is stored on the EIM (Equipment Identification Module)
card.