Configuration
168
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
Tab. 86
Import combinations
To import data from an IntelliGate communication server, proceed as follows:
1. Create a backup of the IntelliGate communication server using the latest version
of AIMS 7.9 (AIMS-Shell:
Tools
/
Backup (PC -> Disk)
).
2. Create a new Aastra 400 communication server in AMS (offline).
3. Configure all the cards on your new communication server in AMS (offline).
4. Import the backup file of theIntelliGate communication server (AMS Shell:
Tools
/
Import
/
Import data from Aastra IntelliGate…
).
5. 6
Configuring
The configuration steps are based on the information determined during the plan-
ning and, where applicable, the installation.
See also:
The procedure for setting up and clearing down an online connection
from AMS to the communication server and the steps for configuring a
single system, a private network (PISN) or an Aastra Intelligent Net (AIN)
are described in detail in the AMS help.
The sections below contain information that may be useful before, during or after a
configuration.
First start of the communication server
If an existing ommunication server is to be upgraded, it must first be in a defined
state. This involves setting or deleting all the parameter values to their country-
specific default values and carrying out a self-test.
Source communication server
Destination communication server
IntelliGate 150
Aastra 415
IntelliGate 300
Aastra 430
IntelliGate 2025
Aastra 415, Aastra 430, Aastra 470
IntelliGate 2045
Aastra 430, Aastra 470
IntelliGate 2065
Aastra 470