Operation and Maintenance
205
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
Software upload
During an upload in system status:
•
Update running
•
Supervision running
•
Normal running
• New communication server
software loaded, starting...
• New communication server
software crashed, rollback
performed
• New communication server
software started and running
well
Date, time
Sync. lost on trunk re-estab-
lished
A BRI/PRI interface entered in the clock pool has
been successfully re-synchronized with the sys-
tem clock.
Port number, date, time
Sync. lost re-established
Synchronization with the network has been
restored on at least one BRI/PRI interface.
Date, time
Synchronisation loss to
exchange
A BRI/PRI interface entered in the clock pool has
lost the system clock
Port number, date, time
System Overload
Network access attempted when all lines are
seized or the system is overloaded.
Route number, user number,
date, time
Terminal power supply:
Overload
Rated output slightly exceeded for > 4 s
Date, time
Terminal power supply:
Shutdown
Rated output clearly exceeded for > 4 s
Date, time
The licensing limit for the
maximum number of users
has been reached
When the 37th user is created in AMS or
WebAdmin and no
Aastra 470 Expansion
licence is in place.
Date, time
The System has crashed
The System has crashed
Date, time
TLS certificate update failed
The update of the TLS certificate for an SIP node
via FTP has failed and needs to be renewed
manually.
Type of endpoint, node ID or
certificate name, date, time
TLS certificate will expire soon
A TLS certificate for an SIP node is about to
expire and needs to be renewed.
Type of endpoint, node ID or
certificate name, date, time
Too few FoIP channels
Setting up a fax connection via T.38 failed
because no FoIP channel is available.
Available FoIP channels on
nodes
Too few VoIP channel licences
Connection setup failed because the licence
limit for simultaneously active VoIP channels
has been reached.
No. of licensed VoIP channels,
Date, Time
Too few VoIP channels
An user is trying to set up a connection that
requires one or more VoIP channels which are
currently not available.
Available VoIP channels on this
node, date, time
Too many event messages
Number of message types exceeds limit
entered in the table on:
• "Synch. loss on BRI/PRI"
• "Outgoing Call Rejected"
• "No response from network"
Date, time
Too many network interfaces
System capacity exceeded
Card No., date, time
Too much user data
System capacity exceeded
Date, time
Event/ error message
Trigger condition
Details