Configuration
160
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
5. 4. 1
Access enabled by local users
Remote access can be enabled in three ways:
• Using function codes (see
• With the AMS Configuration Manager
• Via the System Assistance on the Office 45
It can be revoked again automatically or manually.
All enabling types have equal authorization status. This means that remote access
can be enabled using a function code for example, and then barred again using the
Remote maintenance
setting in AMS or with the System Assistant on the Office 45.
When remote maintenance is activated, the event message
Remote maintenance
on
is sent to the local printer and to all the terminals registered in message group
16.
Remote access can be enabled or barred using the function codes both from the
idle state and the talk state, e. g. after an enquiry.
The authorization to activate / deactivate remote access using function codes can
be allocated in the user configuration (
Remote maintenance = Yes
).
After a first start of the communication server, the authorizations of all users are re-
stricted.
Note:
It is advisable not to keep the remote access authorization permanently
activated. This ensures that the communication server data cannot be
manipulated from a remote location by unauthorized persons.
5. 4. 2
Function code for remote access
Tab. 83
Function codes for remote access authorization
When remote access is enabled using function code *754, access will automatically
be barred again once the remote configuration process has been completed. It is
possible to bar access manually using #754 before a remote configuration process
has been initiated.
Remote access can be enabled permanently using the function code *753. To bar
access, the authorized user must enter the function code #753 manually.
Enable / bar a one-off remote access
*754 / #754
Enable / bar a permanent remote access
*753 / #753