Operation and Maintenance
185
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
6. 3. 3. 2
New card with fewer ports
A card is replaced by a similar card with fewer ports.
Procedure:
Change the card and put the system into operation again. Similar procedure as de-
scribed in
"Replacing a defective interface card", page 184
.
The following data is deleted:
• The system and terminal configuration data of the terminals on the terminalin-
terfaces that are no longer present in the new configuration.
• The system configuration data of the network interfaces that are no longer
present in the new configuration.
Tab. 88
Example: Reducing the number of terminal or network interfaces
Note:
If the terminal configuration data of system phones is deleted following
the reconfiguration of a card, a warning message will appear beforehand
to give you the possibility of cancelling the process. However, this is pos-
sible only if the configuration data of the original card was not already
deleted beforehand.
6. 3. 3. 3
New card with more ports
A card is replaced by a similar card with more ports.
Procedure:
1. Change the card and put the system into operation again. Similar procedure as
"Replacing a defective interface card", page 184
2. Select
Confirm system configuration
in the AMS Configuration Manager.
3. Configure new ports.
The system configuration data (User No., User configuration, etc.) of the terminals
on the new ports is created as new data (default values).
Tab. 89
Example: Expanding the number of terminal or network interfaces
16DSI
→
8DSI
The configuration data of terminal interfaces 9...16 are deleted.
8BRI
→
4BRI
The configuration data of network interfaces 5...8 are deleted.
8DSI
→
16DSI
The configuration data of terminal interfaces 9...16 is created as new data.
4BRI
→
8BRI
The configuration data of terminal interfaces 5…8 are created as new.