INDEX
VCC-X Operator Interface SD
92
E-M
E
Economizer %.........60
Economizer Active Relay, Description.......39
Economizer Control Loop Rate.........30
Economizer Control Type.........30
Economizer Enabled.........60
Economizer Enable Setpoint.........48
Economizer Enable Source Screen.........30
Economizer in IAQ Mode.........60
Economizer in Unoccupied Mode.........30
Economizer
Maximum Position if High CO
2
Level Setpoint.........49
Economizer Minimum Damper
Position.........48
Economizer Minimum Position.........60
Economizer Overrides.............84
Economizer Voltage Output.........31
EM1 Installed.........26
EM1 Relay Con
fi
guration Screens.........38
EM1 Relays.........63
Emergency Shutdown.........35
Energy Saving Timer.........12
Enter
Key.........10,16
New Passcode.........19
ESC Key, De
fi
ned.........10,16
Exhaust Air CFM.........61
Exhaust Air
fl
ow Duct Size.........34
Exhaust Air
fl
ow Monitoring.........34
Exhaust Fan Output Screen.........32
Exhaust Fan Relay Description.........39
Exhaust Fan Status.........61
Exhaust Fan VFD.........50
Exhaust VFD Override.........85
Expansion Relays Heating Stages
VAV/Zone.........73
Expansion Valve 1 Position.........69
Expansion Valve 2 Position.........69
F
Fahrenheit.........25
Fan Cycle Mode Screen.........28
Fan On Min.........77
Fan Proving Screen.........29
Fan Starting Delay Screen.........29
Fan Status.........80
Fan VFD Signal.........27
Fan Voltage Output Screen.........28
Fixed Damper Force Mode.........81
Fixed Position Damper Air
fl
ow.........77
H
H/C Changeover Box VAV/Zone.........72
Head Pressure Setpoint.........69,71
Head Pressure Setpoints - Cooling and
Reheat.........47
Heat/Cool Changeover Delay.........37
Heating
Min Off Time.........37
Min Run Time.........37
Setpoints.........79
Stage Down.........37
Stage Up.........37
Heating Active Stages Status.........58
Heating/Cooling Demand
VAV/Zone Status.........79
Heating Enabled Status.........57
Heating Outputs.........58
Heating Setpoints Status.........56
Heating Stage Relay
Description.........39
Heating Unoccupied Offsets.........42
Heat Pump
Delays - Aux Heat.........37
Heat Pump Con
fi
guration Screen.........32
Heat Pump Defrost Interval.........51
Heat Reset Source Setpoints - High/Low
Reset.........46
Heat Total
MiniLink PD Status.........83
Heat Type Screen.........29
Heat Wheel Defrost Temperature
Setpoint.........52
Heat Wheel Relay Description.........39
High Head Pressure Alarm.........69
Hi SAT Cutoff.........51
Holidays
Programming.........14
Start/Stop Times.........15,23
Hood On HVAC Setpoints.........41
Humidity Control Sensor Type.........33
HVAC Cool/Heat Setpoints.........41
HVAC Hood On Setpoints.........41
HVAC Mode
Cooling Setpoints.........41,42
Heating Setpoints.........41,42
Unoccupied Offsets.........42
HVAC Mode Deadband.........42
HVAC Mode Set By Remote Contact.........27
HVAC Mode Status.........56
HVAC Source Screen.........26
I
IAQ Economizer.........30
Indoor Relative Humidity Setpoint
Percentage.........58
Indoor RH.........58
Indoor RH Setpoint.........44
Initialization
Screen.........11,17
K
Keys
Described.........10,16
Function.........10,16
L
Last Polled Zone
MiniLink PD.........82
Leaving Air Temperature Setpoint.........58
Level 1 User De
fi
ned.........19
Level 2 User De
fi
ned.........19
Loop Search Screen.........20
Low Ambient Relay Description.........39
Low Ambient Setpoint.........51
Low Suction Pressure Alarm.........69
Low Superheat 1 Alarm.........69
Low Superheat 2 Alarm.........69
M
Main Fan Status VAV/Zone.........73
Maverick Testing
MiniLink PD.........83
Max Adjust Static Pressure Control
Rate.........28
Maximum
Damper Force Mode.........81
EMS Offset VAV/Zone.........78
Slide Offset VAV/Zone.........78
Maximum Economizer Position in Heat
Mode.........48
Maximum Outdoor Air CFM.........49
Mechanical Heat/Cool Alarm Delay.........30
MHGRV-X Enabled Status.........58
MHGRV-X Installed.........26
MHGRV-X Reheat Valve Output Signal
Percentage Status.........58
Min Damper Force Mode.........81
MiniLink PD Con
fi
guration.........82
Alarm Polling.........83
Last Polled Zone.........82
Maverick Testing.........83
Mode Changeover Time.........82
Optimal Start Target Zone.........83
System Type.........82
MiniLink PD Status
Adding Additional.........20
Cool Total.........83
Heat Total.........83
Minutes Left.........83
Mode Priority.........83
Schedule Mode.........83
System Status.........83
Minimum Outdoor Air CFM.........49
Minimum Outdoor Air
fl
ow.........49
Minimum Run Times and Off Times.........36
