Command Set
Connect
The
connect
command establishes a connection to another Bluetooth device. The
connect
command may be canceled before a connection is established by issuing a
carriage-return to the EmbeddedBlue device. It can take up to four seconds to cancel
the connection request.
Syntax
con
address
[
timeout
]<CR>
Parameters
address
The Bluetooth address of the remote device. The Bluetooth
device address is the 48-bit IEEE address which is unique
for each Bluetooth unit. The format of a Bluetooth device
address is a series of six hexadecimal byte values separated
by colons, i.e., 00:0C:84:00:05:29.
timeout
An optional parameter used to abort the connection request
after the specified number of seconds. The maximum value
is 120 seconds.
Example
>con 00:0C:84:00:05:29<CR>
ACK<CR>
>
Page 12
▪
EmbeddedBlue 505 User Manual
