Command Set
Set Link Timeout
The
set link timeout
command sets the amount of time it takes for the local
EmbeddedBlue module to notice that the connection has been broken, if the remote
device disappears. This timeout also has an effect on how robust the
communications link is to interference. If this value is set very low, the link may be
lost if interference picks up for several seconds, such as when a heavy burst of
802.11 traffic is encountered. In Bluetooth terminology, this command controls the
setting for link supervisor timeout.
Syntax
set
linktimeout
timeout
[*]<CR>
Parameters
timeout
The time, in seconds, it takes for the module to notice that a
connection has been broken. The default value is 5. The
maximum value is 40 seconds.
*
An optional parameter used to persist the new setting when
the module is powered down.
Example
>set linktimeout 10<CR>
ACK<CR>
>
Page 34
▪
EmbeddedBlue 505 User Manual
