Command Set
Set Name
The
set name
command sets the name of the local device. This is the value that is
transmitted when a remote device performs an Inquiry and then requests the device
name. If you look for local Bluetooth devices from a PC or PDA, this is the value that
will be displayed to the user.
Syntax
set
name
value
[*]<CR>
Parameters
value
A new device name. This value can be up to 32 characters
in length and may contain any valid ASCII character.
*
An optional parameter used to persist the new setting when
the module is powered down.
Example
>set name eb505<CR>
ACK<CR>
>
EmbeddedBlue 505 User Manual
▪
Page 35