Hardware Connections
Hardware Connections
The eb505 module is designed to interface with a 5V signal environment. It supports a power
supply of 5 – 12V and can be connected directly to 0.1” breadboards and 10 x 2 sockets. All
of the required connections are contained on header CN1. In the diagram below, Pin 1 of
connector CN1 is marked with a white dot (Figure 1). A full device pin out is available in the
Technical Specifications section of this manual.
Pin 1 Marked
by White Dot
Figure 1: eb505 Module
EmbeddedBlue 505 User Manual
▪
Page 9