A-PLUS AUTOMATION T2 Series, Instruction Handbook Manual

Page: 9 / 48

9
Double Mitre Saw T2300-T2350-T2400 - T2450
2.11 EQUIPEMENT
The following equipment rare applied to machinery produced in series. Possible special supplies could therefore
ask different accessories described.
2.11.1 STANDARD EQUIPEMENT
The machine is supplied complete with:
• N.1 Allen wrenches set (3/4/5/6 mm)
• N.1 22mm wrench
• N 1 Flanges set
• N.1 fixed slide stop
• N.1 swing slide stop
• N. 1 left neutral extensions of the working bench
• N. 1 right gauged extensions of the working bench
• N. 4 vertical clamps
• N. 2 suction holes Ø 80mm
• N.1 Padlockable Air filter lubricator
• N.1 pneumatic pedal for vertical clamps activation
• N.1 Instructions Handbook
2.11.2 OPTIONALS ACCESSORIES ON REQUEST
The machine can be supplied with following optionals:
• Mist-Spray Cooling System to cut aluminum profiles
• 3
rd
working bench extension 1200 mm (right)
• pneumatic horizontal moulding clamp
• adjustment of blades stroke
• blades for wood, aluminum or plastic
Any modification and/or addition of accessories, must be expressly approved and executed by
the Manufacturer.
2.12 ELECTROMAGNETIC ENVIRONMENT
The Machine is designed to operate properly in an industrial electromagnetic environment, being included in the
following Norms about Emission and Immunity:
EN 50081-2 Electromagnetic compatibility-Generic Norm on Emissions-2
nd
part-Industrial Environment-(1993)
EN 50082-2 Electromagnetic compatibility-Generic Norm on Immunity-2
nd
part-Industrial Environment-(1995)