manualshive.com logo in svg

A-PLUS AUTOMATION T2 Series, Instruction Handbook Manual, Page: 47 / 48

Share
Download
A-PLUS AUTOMATION T2 Series Instruction Handbook Manual Download Page 47

47

Double Mitre Saw T2300-T2350-T2400 - T2450

FAC-SIMILE

CE DECLARATION OF CONFORMITY

2006/42/CE (ATTACHED II part A)

The undersigned, representing the following manufacturer

Manufacturer

A-Plus Automation S.r.l.

Address

Via Selva, 23/25, 47122 Forlì (FC) Italia

has instructed the person authorized to compile and retain the technical file

Name

A-Plus Automation S.r.l.

Address

Via Selva, 23/25, 47122 Forlì (FC) Italia

The manufacturer declares that the under mentioned machine

Generic  / Trade name

T2xxx Double Mitre Saw

Funzione 

Pneumatic manual miter saw for V cutting

Model

445

Type

T2xxx

Serial Number

445.17.xxx

Year of manufacture

2017

conforms with all provision applicable under the following EU Directives 

(including all applicable modifications)

2006/42/CE - Machine Directive

2014/30/UE - Electromagnetic Compatibility Directive

The list of main standards followed by the applicable part and as documented in the technical file, is attached to 

this statement.

Forlì, 04/12/2017.

The managing director, Dennis Zavoli

-  TRADUZIONE - 

  

Via Selva, 23/25 - 47122 Forlì - Italy

Tel. +39 0543 481142 / Fax. +39 0543 480770

[email protected] / www.a-plusautomation.com

A-Plus Automation s.r.l.

C.F. e P.IVA IT 04349600405 – REA: FO-404194

Summary of Contents for T2 Series

















































Reviews:

No comments