A-PLUS AUTOMATION T2 Series, Instruction Handbook Manual, Page: 5 / 48

5
Double Mitre Saw T2300-T2350-T2400 - T2450
As well as adopting an appropriate utilization technique, the recipients of the information must read and strictly
apply them.
This information is supplied by the manufacturer in its own language (Italian) and may be translated into other
languages to satisfy statutory and/or sales needs.
A little time dedicated to the study of this information, will permit the user to avoid health and safety risks to
personnel and economic loss.
The translation in the language of the country of use, supplied by the manufacturer, its representative or whoever
brings the machine to such linguistic area, must be carried out from the “ORIGINAL INSTRUCTIONS” and must
display the phrase “TRANSLATION OF THE ORIGINAL INSTRUCTIONS”.
In the event that the manual herein contains additional information concerning the fittings of the machinery, said
information does not interfere with the reading of the manual.
Keep this manual for the entire duration of its useful life in a well known and easy to access place, available for
reference any time the need should arise.
The manufacturer reserves the right to make modifications with no obligation to supply a prior notification.
1.7 SYMBOLS
SYMBOL MEANINGS
DANGER
It indicates a danger with a mortal risk for the operator.
WARNING
It indicates a warning or a note about key functions or useful information.
Pay the maximum attention to the paragraph marked with this symbol.
OBSERVATION
is requested to take a measurement data, to check a signal, etc.
INQUIRY
The user is requested to check the proper positioning of any element of
the machine, before operating a certain command.
EXAMINATION
It’s necessary to consult the handbook before effecting a certain
operation.
ADJUSTMENT
In specific particular cases of working and/or anomalies, it can be
requested a certain mechanical adjustment and/or electrical setting.