8
3M™MicroTouch™ System DST2270DX Integration Guide
3M Touch Systems, Inc. Proprietary Information – TSD-25739
Note:
Consult the display manufacturer to find out whether the original warranty will
be affected if you install the sensor. Also, determine who will recertify the display.
Recertification will be necessary to comply with safety and FCC or EMC regulations.
Important Safety Information
Read, understand, and follow all safety information before using this product. Follow all
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
Intended Use
The 3M™ MicroTouch™ DST2270DX Integration Guide is intended to instruct and
guide you in the integration of a DST sensor into an existing large format flat sensor
display. This manual provides specific instructions for a large format display. These
sensors are intended for indoor use only and are not designed for use in hazardous
locations.
Explanation of Signal Word Consequences
DANGER:
Indicates a potentially hazardous situation, which, if not avoided, will
result in death or serious injury and/or property damage.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury and/or property damage.
NOTICE:
Indicates a potentially hazardous situation, which, if not avoided, may
result in property damage.
DANGER
To avoid the risk of fire and/or explosion which will result in serious injury or
death:
•
Do not install or use this product in a hazardous location.
WARNING
To reduce the risk of fire and/or explosion which could result in serious injury or
property damage:
•
Do not use this product in any outdoor environment unless NEMA standards (or
other similar standards such as IP rating) are followed
To reduce the risk of hazardous voltage which could result in serious injury or
death:
•
Do not use a damaged power supply.
•
Do not use a power cord that is frayed or otherwise damaged.
•
You must be a qualified technician with experience in assembling and
disassembling different types of displays. You must know the specifics of your
