3M™MicroTouch™ System DST2270DX Integration Guide
11
3M Touch Systems, Inc. Proprietary Information – TSD-25739
Supplies and Tools Needed for the Installation
Before starting the installation procedure, check that you have all items listed below.
Supplies Needed
•
Safety glasses
•
Clean, anti-static pad
•
Small containers for holding loose
parts (paper cups)
•
ESD Foam blocks and pad
•
Electrical tape (or black acetate tape)
•
Felt-tip marker pen
•
A clean soft cloth and cleaner for the
display and sensor
•
Cable tie-wraps
•
ROHS compliant solder
•
Replacement screws for mounting a
flat panel to a bezel or chassis
•
Ring lugs or crimps
•
Nylon spacers and washers
•
Gloves for handling glass
•
ESD strap
•
Bezel sealing gasket -- 3M 4508
•
Display mounting tape -- 3M 5962 &
5925 (already installed)
•
5 mil thick polyimide tape
•
Copper tape
Tools Needed
•
Flat-blade screwdriver with insulated
handle
•
Plastic burnisher
•
Razor knife or single-edge razor
blade
•
Soldering iron
•
Phillips-head screwdriver
•
Center punch
•
Power drill
•
Variety of drill, tap, and spade bits
•
Wire stripper
•
Crimping tool
•
Compressed air (optional)
•
Dremel® tool or nibbler
Preparing Your Work Space
Comfortable Work Area
Select a comfortable work area with adequate space and lighting. Make sure that the area
is free of clutter and/or objects that could scratch the sensor and flat panel display. 3M
Touch Systems recommends an area of at least 25 square feet. You need this space to
handle components safely and to set major components aside during the installation.
ESD Workbench
A certified ESD workbench is recommended when working with electronics assemblies.
