International - ENG
February 2021
3M-Matic
™
Accuglide 3 - 2 Inch Taping Head - Type 10800
Original Instructions
Page 6
Source Document for all related Manuals/Translations
44-0009-2070-0 / ECO#0078483
(Specifications
continued
on next page.)
Specifications
1. Tape:
For use with Scotch
®
pressure-sensitive film box sealing tapes.
2. Tape Width:
36mm or 1.5 inches minimum to 48mm [2 inches] maximum.
3. Tape Roll Diameter:
Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
®
film tapes.)
4. Tape Application Leg Length - Standard:
70mm ± 6mm [2.75 inches ± 0.25 inch]
Tape Application Leg Length - Optional:
50mm ± 6mm [2 inches ± 0.25 inch] (See “Adjustments – Tape Leg Length.”)
5. Box Size Capacities:
For use with center seam regular slotted containers.
When upper and lower taping heads are used on
“3M-Matic”
case sealers, refer to the
respective instruction manual specifications for box weight and size capacities.
6. Operating Rate:
Conveyor speeds up to 0.5 m/s [100 feet per minute].
7. Operating Conditions:
Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.
Important –
Taping heads should not be washed down or subjected to conditions causing
moisture condensation on components.
8. Taping Head Dimensions:
Length – 442mm [17.38 inches]
Height – 648mm [25.5 inches] (with tape drum)
Width – 105mm [4.13 inches] (without mounting spacers)
Weight – Packaged: 8.6kg [19 lbs.] Unpackaged: 7.7kg [17 lbs.]