International - ENG
February 2021
3M-Matic
™
7000r-I / 7000r3-I Pro
- Type 11700
Original Instructions
Page 8
Source Document for all related Manuals/Translations
44-0009-2165-8 / ECO# 0078045
3.4 Operator’s Qualifications
- Machine Operator
- Mechanical Maintenance Technician
- Electrical Maintenance Technician
- Manufacturer’s Technician/Specialist
(See Section 3)
3.5 Number of Operators
The operations described below have
been analyzed by the manufacturer;
the recommended number of opera-
tors for each operation provides the
best and safest work performance.
Note:
A smaller or greater number of
operators could be unsafe.
3.6 Instructions for a Safe Use of the
Machine / Definition of Operator’s
Qualifications
Only persons who have the skills
described in the skill levels section
should be allowed to work on the
machine. It is the responsibility of
the user to appoint the operators
having the appropriate skill level and
the appropriate training for each
category of job.
3.7 Residual Hazards
The case sealer
7000r-I / 7000r3-I Pro
incorporates various safety protec-
tions which should never be removed
or disabled. It is essential that the
operator and service personnel be
warned that hazards exist which
cannot be eliminated:
3.8 Recommendations and Measures to
Prevent Other Hazards which Cannot
be Eliminated
- The operator must stay on the
working position shown in the
Operation Section. He must never
touch the running driving belts or
put his hands inside any cavity.
- The operator must pay attention
to the blades during the tape
replacement.
3.9 Personal Safety Measures
Safety glasses, safety gloves, safety
helmet, safety shoes, air filters, ear
muffs - None is required except
when recommended by the user.
3.10 Predictable Actions which are
Incorrect and Not Allowed
- Never try to stop/hold the box
while being driven by the belts.
- Never remove or disable the
safety devices.
- Only authorized personnel should
be allowed to carry out the adjust-
ments, repairs or maintenance
which require operation with
reduced safety protections.
During such operations, access to
the machine must be restricted.
When the work is finished, the
safety protections must immedi-
ately be reactivated.
- The cleaning and maintenance
operations must be performed
after disconnecting the pneumatic
system and electric power.
- Do not modify the machine or any
part of it.
- Clean the machine using only dry
cloths or light detergents. Do not
use solvents, petrols, etc.
- Install the machine following the
suggested layouts and drawings.
3. Safety
(continued)
• To reduce the risk associated with
mechanical and electrical hazards:
- Read, understand, and follow all safety
and operating instructions before
operating or servicing the case sealer.
- Allow only properly trained and
qualified personnel to operate and
service this equipment.
Warning
