3e Technologies International AirGuard 3e-525A-3 User Manual Download Page 71

Page: 71 / 112

3e–525A–3 Wireless Access Point

Chapter 3: Access Point Confi guration

29000167-001 B

Remote Confi guration Upgrade

On the

System Administration — System Upgrade

screen, click on

the

Remote Confi guration Upgrade

tab to upload and download confi g-

uration fi les to access points in remote locations which are not confi gured.

This remote confi guration upgrade feature allows you to selectively

transfer a confi guration fi le to other APs. Once the fi le is transferred, the

remote AP will be rebooted. Once the remote units are rebooted, the site

map can be updated and the File Tag will show the status of the units. If

the tag matches the local tag, the unit was updated successfully.

The random confi guration fi le is used to update the bridging SSID

and bridging encryption on other devices using the existing bridging

link. If the bridging key or the bridging SSID is changed on the normal

confi guration screen, then the bridging link to the other devices will be

terminated, and the confi guration can not be updated.

Summary of Contents for AirGuard 3e-525A-3

















































































































Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands

3e Technologies International AirGuard 3e-525A-3, User Manual

Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands