3e Technologies International AirGuard 3e-525A-3 User Manual Download Page 22

Page: 22 / 112

3e-525A–3 Wireless Access Point

Chapter 2: Hardware Installation

29000167-001 B

• 3e-RK1 reset kit
• 3e-OPK-3 outdoor protection kit

The bridge antenna port is used when confi guring the unit to be used

as a bridge. The port uses an omni-directional antenna.

The 3e–525A–3 can be mounted outdoors on a high post to achieve

the best bridge result.If mounted outdoors, the outdoor protection kit

must be used to prevent lightning damage.

To comply with FCC RF exposure compliance requirements,

the antennas used with the 525A–3 must be installed with

a minimum separation distance of 20 cm from all persons, and must

not be co-located or operated in conjunction with any other antenna or

transmitter. Installation should be accomplished using the authorized

cables and/or connectors provided with the device or available from the

manufacturer/distributor for use with this device. Changes or modifi ca-

tions not expressly approved by the manufacturer or party responsible for

this FCC compliance could void the user’s authority to operate the equip-

ment.

Installation Instructions

The 3e–525A–3 is intended to be installed as part of a complete wire-

less design solution.

This manual deals only with the 3e–525A–3 device and its accessories.

The purpose of this chapter is the description of the device and its iden-

tifi able parts so that the user is suffi ciently familiar to interact with the

physical unit. Preliminary setup information provided below is intended

for information and instruction of the wireless LAN system administra-

tion personnel.

It is intended that the user not open the unit. Any main te nance re-

quired is limited to the external enclosure surface, cable con nec tions, and

to the man age ment software (as described in chapter three through fi ve)

only. A failed unit should be returned to the man u fac tur er for mainte-

nance.

Minimum System and Component Requirements

The 3e–525A–3 is designed to be attached to the wall at appropriate

locations. To complete the confi guration, you should have at least the fol-

lowing components:

• PCs with one of the following operating systems installed: Win-

dows NT 4.0, Windows 2000 or Windows XP;

• A Wi-Fi compatible 802.11a/b/g device for each computer that

you wish to wirelessly connect to your wire less network. For FIPS

140-2 validated™ operation, the following software can be used:

– 3e-110 PC Card with 3e-010F Crypto Client software (sold sepa-

rately) or install the 3e-010F software with any compatible PC

Summary of Contents for AirGuard 3e-525A-3

















































































































Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands

3e Technologies International AirGuard 3e-525A-3, User Manual

Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands