3e Technologies International AirGuard 3e-525A-3 User Manual Download Page 55

Page: 55 / 112

3e–525A–3 Wireless Access Point

Chapter 3: Access Point Confi guration

29000167-001 B

The SNMP confi guration consists of several fi elds, which are ex-

plained below:

• Community

–The Community fi eld for Get (Read Only), Set

(Read & Write), and Trap is simply the SNMP terminology for

“password” for those functions.

• Source

–The IP address or name where the information is ob-

tained.

• Access Control

–Defi nes the level of management interaction per-

mitted.

If using SNMPv3, enter a username (minimum of eight characters),

authentication type with key and data encryption type with a key. If FIPS

mode, only SHA and AES are supported. This confi guration information

will also need to be entered in your MIB manager setup.

Misc Service

Under Misc Services you can enable or disable your print server. The

default is enabled. If you do not plan to set up the print server function,

click disable. Note, you can only use a printer with a USB port.

Summary of Contents for AirGuard 3e-525A-3

















































































































Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands

3e Technologies International AirGuard 3e-525A-3, User Manual

Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands