3e Technologies International AirGuard 3e-525A-3 User Manual Download Page 64

Page: 64 / 112

3e–525A–3 Wireless Access Point

Chapter 3: Access Point Confi guration

29000167-001 B

DHCP Client List

The

Monitoring/Report — DHCP Client List

screen displays all

clients currently connected to the 3e–525A–3 via DHCP server, including

their hostnames, IP addresses, and MAC Addresses.

The DHCP Client list constantly collects entries. To remove entries

from the list, check mark the

Revoke Entry

selection and click

Remove

confi rm the action.

System Log

The

Monitoring/Report — System Log

screen displays system facil-

ity messages with date and time stamp. These are messages documenting

functions performed internal to the system, based on the system’s func-

tionality. Generally, the Administrator would only use this information if

trained as or working with a fi eld engineer or as information provided to

technical support.

The System log continues to accumulate listings. If you wish to clear

listings manually, use the

Clear

button.

Summary of Contents for AirGuard 3e-525A-3

















































































































Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands

3e Technologies International AirGuard 3e-525A-3, User Manual

Search results

Summary of Contents for AirGuard 3e-525A-3

Reviews:

Related manuals for AirGuard 3e-525A-3

Brands by name

Popular brands