3e–525A–3 Wireless Access Point
Chapter 3: Access Point Confi guration
42
29000167-001 B
Rogue AP Detection
The
Wireless Access Point — Rogue AP Detection
screen allows the
network administrator to set up rogue AP detection. Enable rogue AP
detection and enter the MAC Address of each AP in the network that you
want the AP being confi gured to accept as a trusted AP. (You may add
up to 20 APs.) Enter an email address for notifi cation of any rogue or
non-trusted APs. (The MAC Address for the 3e–525A–3 is located on the
System Confi guration — General
screen. You can also select the follow-
ing fi lter options.
•
SSID FIlter
: Check the SSID option to only send rogue APs that
match the AP's SSID or wireless bridge's SSID.
•
Channel Filter
: Check the channel fi lter option to only send rogue
APs that match the AP's channel or the wireless bridge's channel.
• If both options are checked, only APs that match both the SSID
and channel are sent.
The
Adjacent AP list
, under
Monitoring/Reports
on the navigation
menu, will detail any marauding APs.
