11
3D SYSTEMS, INC
.
Please see the
MQC 600 Single/Flex User Guide
. At any particular fresh powder ratio setting, the minimum volume of fresh and
used powder required to initiate a blend are displayed on the MQC home screen.
The default fresh powder ratio setting for DuraForm ProX PA material is 40%.
Material may build up on the roller and in other areas in the print chamber, as well as on the MQC System. Refer to the
procedures in your printer’s
User Guide
for the following cleaning information:
•
Cleaning the SLS System between Prints
•
Cleaning the Laser Window
•
Cleaning the Blackbody section
•
Cleaning the Overflow Screen
•
Cleaning the Sock Filter
Blending Fresh and Used Material
Cleaning up the SLS System
