54
3D Systems, Inc
.
4 . Reach around the material cartridge, grasp the exposed material coming from
the cartridge and gently pull it out of the print jet . Select the
checkmark
to
continue .
NOTE: For printers that have three cartridge bays, the second
cartridge bay is equipped with hinges so the cartridge can rotate
counter-clockwise . This provides easier access to the third
cartridge .
5 . Grasp the cartridge handle and pull the cartridge up and out from its mount .
Pull out the remaining material from the feed tube . Select the
checkmark
to
continue .
6 . Install the thumbscrew into the cartridge . Measure 1 inch of material coming
from the cartridge and cut off the remaining material . Select the
checkmark
to
continue .
CAUTION: Do not attempt to push the excess material back into
the cartridge . Doing so will cause the cartridge to bind making it
unusable .
7 . Remove the thumbscrew securing the material to the new material cartridge .
Select the
checkmark
to continue .
