Pannoramic SCAN 150 1.18 User’s Guide
4 Software Description
4.
Generate name if no name was defined
By choosing this option, a name is generated automatically in the following format if no
name was defined and there is no barcode:
<magazine number>M<slide position>
(for example,
1M10
)
The number before M represents the magazine number. The number after M represents the
slide position. In this example, the name indicates a slide in magazine 1, position 10.
You can also define names for the slides in the table below, by entering names into the
column
Names / Barcodes
. You can also define profiles in the selection boxes in column
Profiles
if you intend to use different profiles for slides.
NOTE:
If the
Continuous scanning
mode is activated this function is not available.
Current Profile
is the profile loaded in
Routine Work
/
Scan Profiles
.
You can save the entered names and assigned profiles by clicking
. You can define a name before saving. The information will be
saved in a CSV format:
1;<slide position>,<slide name>,<profile name>
You can export this information into Excel where you can change the data and save it again
in CSV format.
You can import previously saved names and assigned profiles by clicking
.
You can delete all entries from the table by clicking
.
April 3, 2014 - Rev. 1
3DHISTECH Ltd.
70(131)