Pannoramic SCAN 150 1.18 User’s Guide
5 Troubleshooting and Maintenance
3. Press plug securing latches inward (
1
) then disconnect plug of the lamp module (
2
) (see
Figure 78
).
Figure 78 – Disconnect plug
4. Loosen pressure bolt with the lever (
1
) and by keeping the lever pressed, remove lamp
module (
2
) (see
Figure 79
).
Figure 79 – Removing the lamp module
5. Carefully retrieve the new lamp module from its transporting container. Hold the lamp
module only by its ceramic part.
6. Insert the new lamp module. Make sure that the groove (
1
) in the contact surface of the
lamp captures the corresponding pin of the lamp mount (see
Figure 80
).
Figure 80 – Inserting the lamp module
April 3, 2014 - Rev. 1
3DHISTECH Ltd.
118(131)