3Com VCX V7000, Installation And Maintenance Manual

Page: 83 / 144

Installation Scripts 83
UMS Installation Script — Secondary UMS Server (continued)
Is this host the primary or the secondary (P/S)? [P] : s
Enter s to indicate that this server is the secondary server.
Enter the device name of the Network Card? : eth1
All VCX servers have two network cards. When UMS is configured to run
on separate servers from the Call Processor and back end servers, it uses
both cards. To answer this question, enter the name of the second card,
eth1.
Enter the device name of the Second Network Card, enter if only one? : eth0
To answer this question, enter the name of the first card, eth0.
Name of the Remote Intelligent Mirrored System? : vcxums01
IP Address for vcxums01 []? : 10.20.30.44
Enter the IP address of eth0 on the primary UMS server.
The next IP addresses are the same static addresses that you entered
when configuring the primary UMS server.
IP Address for active []? : 10.20.30.48
IP Address for standby []? : 10.20.30.49
Is this host the primary or the secondary (P/S)? : S
VCX 7300 node configuration.
IP Address for Server vcxums02? : 10.20.30.46
Does this System support SMDI? (Y/N)? [N]
If the VCX system supports message waiting notification over serial lines,
press the Enter or Return key to accept the suggested answer. Otherwise,
enter
y.
Should the system use the European date order (Y/N)? [N]:
To use the US date order, press the Enter or Return key to accept the
suggested answer.
Enter the Customer name? [customer] :
Optionally you can enter a customer name.
Would you like to edit the file containing your selections (Y/N)? [N]:
Press the Enter or Return key to accept the answers you have entered, or
enter
y to see the questions again and modify one or more of your
answers.
End of UMS Installation Script — Secondary UMS Server