background image

Installation Scripts

37

Initial VCX Configuration Script — Primary Server

---------------------------------------------------------------------------

---------------------- Initial VCX Configuration --------------------------

---------------------------------------------------------------------------

One or more VCX components in the currently selected VCX version require

initial configuration.  This configuration must be completed before any

VCX services can be started.

Do you wish to configure VCX at this time?

If you say no, VCX services will not be started, and you will be prompted

again to do this configuration when you reboot.

Configure VCX now? [yes] :

Press Enter to accept the default answer (yes).

Several lines of text appear before the Accounting Server configuration 
prompt.

3Com Accounting Server Start Configuring ....

Enter Local IP Address [10.20.30.40]:

Using 3Com Accounting Server ...

Local IP Address: 10.20.30.40

Database Name: cwbes

Oracle SYS Password: besgroup

Do you want to continue with the above settings ? [n/y]: 

y

Enter 

y

 to accept the configuration parameters that you have entered for 

the Accounting Server or 

n

 to change any entry you made.

Several lines of text appear before the Authentication Server prompt:

3Com Authentication Server Start Configuring ....

Enter Local IP Address [10.20.30.40]:

Will you Setup Multi-Master Replication ? [n/y]: 

y

For Multi-Master Replication: Is this the MASTER DEFINITION SITE ? [n/y]: 

y

Using 3Com Authentication Server ...

Local IP Address: 10.20.30.40

Database Name: cwbes

Oracle SYS Password: besgroup

Multi-Master Replication Mode MASTER SITE (PRIMARY)

Do you want to continue with the above settings ? [n/y]: 

y

Enter 

y

 to accept the configuration parameters that you have entered for 

the Authentication Server or 

n

 to change any entry you made.

Several lines of text appear before the Billing Server prompt:

Summary of Contents for VCX V7000

















































































































































Reviews: