3Com VCX V7000, Installation And Maintenance Manual

Page: 73 / 144

Installation Scripts 73
cd /opt/3com/VCX/dir/bin
./dir stop
3 Stop the tomcat application on both servers.
On the primary VCX server and the secondary VCX server enter these
commands:
su - tomcat
cd $CATALINA_HOME/bin
./shutdown.sh
exit
4 Configure the VCX firewall to pass oracle packets.
/opt/3com/VCX/bin/modfw -p oracle allow 10.20.30.40
/opt/3com/VCX/bin/modfw -p oracle allow 10.20.30.41
The IP addresses for these commands are the addresses of the eth0 and
eth1 Ethernet adapters on the primary VCX server.
5 On the secondary VCX server, log in as root and enter these commands.
/opt/3com/VCX/bin/modfw -p oracle allow 10.20.30.40
/opt/3com/VCX/bin/modfw -p oracle allow 10.20.30.41
The IP addresses for these commands are the addresses of the eth0 and
eth1 Ethernet adapters on the primary VCX server.
6 Enter these commands to enable database replication.
su - cworks
cd /opt/3com/VCX/auth/bin
./setupReplication
Replication is now enabled for both the authentication and directory
applications.
7 Start the auth, dir, and tomcat applications using these commands:
cd /opt/3com/VCX/auth/bin
./auth start
cd /opt/3com/VCX/dir/bin
./dir start
su - tomcat
cd $CATALINA_HOME/bin
./startup.sh
exit
At this point, the installation of the two VCX servers has been completed.
The next procedure describes how to configure the Primary UMS server.