3Com VCX V7000, Installation And Maintenance Manual

Page: 78 / 144

78 C
HAPTER
3: I
NSTALLATION
S
CRIPTS FOR
T
WO
S
ERVER
P
AIRS
UMS Installation Script — Primary UMS Server (continued)
IP address of the secondary proxy? (hit Enter if none) [ ] 10.20.30.42
Enter the IP address of the secondary VCX Call Processor server
(10.20.30.42 in this sample configuration that contains two server pairs
of servers).
Intelligent Mirroring configurations
Should Intelligent Mirroring be enabled (Y/N)? [N]: Y
All supported UMS configurations require Intelligent Mirroring. Enter y.
Enter the Device Name of the Network Card to be used by UMS? : eth1
All VCX servers have two network cards. When UMS is configured to run
on separate servers from the Call Processor and back end servers, it uses
both cards. To answer this question, enter the name of the second card,
eth1.
Enter the Device Name of the Second Network Card to be used by UMS, press ENTER
if only one? : eth0
To answer this question, enter the name of the second card, eth0.
Name of the Remote Intelligent Mirrored System? : vcxums02
IP Address for vcxums02 []? : 10.20.30.46
Enter the IP address of eth0 on the vcxums02 server.
IP Address for active []? : 10.20.30.48
IP Address for standby []? : 10.20.30.50
Is this host the primary or the secondary (P/S)? : P
VCX 7300 node configuration.
IP Address for Server vcxums01? : 10.20.30.44
Does this System support SMDI (Y/N)? [N]:
If the VCX system supports message waiting notification over serial lines,
press the Enter or Return key to accept the suggested answer. Otherwise,
enter
y.
Should the system use the European date order (Y/N)? [N]:
To use the US date order, press the Enter or Return key to accept the
suggested answer.
Enter the Customer name? [customer] :
Optionally you can enter a customer name.
Would you like to edit the file containing your selections (Y/N)? [N]: n
End of UMS Installation Script — Primary UMS Server