page
150
PalmPilot Handbook
Conducting a HotSync via Modem
HotSync enables you to synchronize the PalmPilot when you are
away from your PC by using a modem HotSync operation.
Note:
You must conduct a local HotSync using the PalmPilot
organizer’s Cradle connected to the serial (COM) port of your PC
before attempting a modem HotSync operation.
To perform a HotSync operation via modem, the PalmPilot,
PalmPilot Desktop, and both modems must be configured properly.
You will also need:
■
Modem connected to your computer
■
Modem connected to your PalmPilot
■
Special modem cable to connect the PalmPilot organizer’s
serial connector to the modem. (The Cradle is not used for a
modem HotSync operation.) This special cable may be
ordered by contacting the number listed in Appendix A:
Technical Support, Service and Repair.
PalmPilot Configuration
To conduct a HotSync operation via a modem:
1.
Turn on the PalmPilot and tap the Applications button.
2.
Tap HotSync.
3.
Tap the Enter Phone # button under the Modem
Sync icon. The Phone Setup dialog appears on the
PalmPilot screen, as shown below:
Note:
If you have Network HotSync
™
software installed on your
PalmPilot organizer, the Remote Setup screen will appear. Refer
to the Network HotSync Handbook for more information.
Summary of Contents for PalmPilot
