ILMI Setup
135
Update LECS-Address
Access Status
Updates the LECS-via-ILMI parameter for the specified port in the
CoreBuilder 7000 family ATM switch. If this parameter is enabled, the
LEC communicates on the channel VPI/VCI = (0/16) with the ILMI MIB.
The LEC submits an inquiry to obtain the LECS address. If this parameter
is disabled, the LEC retrieves the ATM address of the LECS via the
well-known address.
Command Actions
Command Result
Example
Enter:
1 1 8 4 2 3.2 1
The following message is displayed:
LECS via ILMI is set to ENABLED
The LECS-via-ILMI status of port 2 in slot 3 is enabled.
Enter the menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(8) IME: ILMI setup
(4) MIB: ILMI MIB View setup
(2) SET: Set&save LECS via ILMI sta
Enter a parameter at the prompt
Parameter
Format or Range
Port ID
slot.port
LECS-via-ILMI
enable/disable
0
to disable LECS-via-ILMI
1
to enable LECS-via-ILMI
Direct access sequence:
1 1 8 4 2
[parameters]
System action taken:
The LECS-via-ILMI status is updated for the selected
port immediately and is saved in flash.
System message display:
LECS via ILMI is set to
ENABLED/DISABLED
Summary of Contents for CoreBuilder 7000
