Display Call Routing
167
Table 23
Call Parameters
Name
Description
Call ID
The unique number identifying the call.
Call Type
Whether the call is SVC or PVC, and if it is a point-to-point
or point-to-multipoint call.
When showing a connection of LAN Emulation, Control
point-to-point indicates use of the control direct VCC (for
LES), or the multicast sent VCC (for BUS).
When showing a connection of point-to-multipoint, it
indicates use of the control distribute VCC (for LES) or
Multicast forward VCC (for BUS).
Call State
Whether the call is active or not.
Number of Out
Connections
The number of output destinations that the call is routed
to. In a point-to-point call this is always one, whereas in a
point-to-multipoint call, this number may be greater than
one.
Priority
Whether the call cells are transferred through the switch
to the high priority queue or low priority queue.
CLL (Cell Loss Level)
The queue saturation level at which cells with their CLP bit
set are discarded. The possible values can be: no discard,
20%, 50%, 80%. The default value is 50%. For a
point-to-multipoint call, the value is constant at 80%.
Time of Last Change of
Operational State
The interval, in msecs, since the operational state of the
call was last changed.
In Connection VPI
The Virtual Path Identifier (VPI) number of the input port.
In Connection VCI
The Virtual Channel Identifier (VCI) number of the input
port.
In Connection Port ID
The port ID of the input port.
In Connection ATM
Address Member
The ATM address member of the source (if the source is
not SVC, this field is empty).
Out Connection VPI
The Virtual Path Identifier (VPI) number of the output port.
Out Connection VCI
The Virtual Channel Identifier (VCI) number of the output
port.
Out Connection Port
ID
The port ID of the output port.
Out Connection ATM
Address
The ATM address of the destination. If the destination is
not SVC, this field is empty.
Out Connection ATM
Address Member
The ATM address member of the destination. If the source
is not SVC, this field is empty.
Summary of Contents for CoreBuilder 7000
