3Com CoreBuilder 7000, Management Manual

Page: 271 / 516

MPOA Devices Configuration 271
Set Keep-Alive
Lifetime
Sets the MPS-p2 keep-alive lifetime parameter.
Command Actions
Command Result
Example:
Enter:
2 5 1 3 900
The following message is displayed:
Parameter changed successfully. keep-alive lifetime should be
at least 3 times keep-alive time (220).
The keep-alive lifetime parameter is set.
Enter menu sequence:
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(1) MPS: MPOA Server Configuration
(3) MP2: Set keep-alive lifetime
Enter a parameter at the prompt
Parameter Format or Range
keep-alive lifetime
3 - 1000
(seconds)
Direct access sequence:
2 5 1 3 [parameters]
System action taken: The keep-alive lifetime parameter is set.
System message display:
Parameter changed successfully.
keep-alive lifetime should be at least
3 times keep-alive time (220).