3Com CoreBuilder 7000, Management Manual

Page: 157 / 516

ILMI ATM Addresses 157
Command Actions
Command Result
Table 22 describes the IME and scope parameters displayed by the
command.
.
Enter the menu sequence:
(3) CON: Connections
(1) ADD: ATM addresses
(4) SCO: IME addresses & scope
Enter a parameter at the prompt
Parameter Format or Range
Port ID slot.port ( 0.0 for all ports)
Direct access sequence:
3 1 4
[parameters]
System action taken: The IME addresses for the specified port are displayed.
System message display:
Information is displayed as shown in the example
below.
Table 22
IME and Scope Parameters
Name Description
Port ID ATM port id.
ATM address -
Network prefix Network prefix of ATM address
ATM address -
User part User part of ATM address