3Com CoreBuilder 7000, Management Manual

Page: 173 / 516

Display Virtual Channels at Port 173
Display Virtual
Channels at Port
The following commands allow you to display the virtual channels
(connections) established at a port.
■
Display Virtual Channel to IME Address
■
Display Virtual Channel to Static Address
■
Display Virtual Channel to De-Registered Address
For information about establishing port connections, see “External Links
– ATM Connections” on page 99 in the Operations Guide.
Display Virtual
Channel to IME
Address
Displays information about virtual channels established at a specific port.
Specify the virtual channel by specifying its VPI/VCI values. The virtual
channels were created dynamically (SVCs).
Command Actions
Command Result
Enter the menu sequence:
(3) CON: Connections
(3) PRT: ATM ports
(1) IME: Conns of IME addresses
Enter a parameter at the prompt
Parameter Format or Range
Port ID slot.port
VPI
A
for all VPI values
VCI any value for all VPI values
Direct access sequence:
3 3 1
[parameters]
System action taken: The connection information for the specified port is
displayed.
System message display:
Information is displayed as shown in the example on
pages 174.