3Com 7600 User Manual Download Page 88

Page: 88 / 210

7-2

HAPTER

7: M

ANAGING

ATM R

ESOURCES

Display ATM Port
Attributes and
Statistics

Displays the internal ATM port attributes and statistics (refer to Table 7-2)

Example

Enter:

[4] [1]

Table 7-1

Task Actions

Menu
Sequence

Enter

Result

[4] atm
[1] display

None

Internal ATM port attributes and
statistics are displayed

Table 7-2

ATM Port Attributes and Statistics

Parameter

Description

Admin Status

The port status (“up” or “down”) defined
administratively using the Administration Console or
SNMP Manager. If the port is administratively down, it
will stay operationally down.

Oper Status

The operational status of the port (“up” or “down”).
A down status may be caused by the port being
administratively down.

In Octets (ATM Layer)

All octets received on the ATM port to the ATM layer
excluding Physical layer discards.

In Ucast (ATM Layer)

All cells received on the ATM port to the ATM layer
excluding Physical and ATM layer discards.

In Octets (AAL5 Layer)

All octets received on the ATM port to the AAL5 layer
excluding Physical and ATM layer discards.

In Ucast (AAL5 Layer)

All AAL5 frames received on the ATM port excluding
Physical, ATM and AAL5 layer discards.

Out Ucast (AAL5 Layer)

All AAL5 frames transmitted from the AAL5 layer
including AAL5, ATM and Physical layer discards.

abtthgde.book Page 2 Tuesday, June 23, 1998 10:29 AM

Summary of Contents for 7600



















































































































































































































Search results

Summary of Contents for 7600

Reviews:

Related manuals for 7600

Brands by name

Popular brands

3Com 7600, User Manual

Search results

Summary of Contents for 7600

Reviews:

Related manuals for 7600

Brands by name

Popular brands