8-8
C
HAPTER
8: M
ANAGING
LAN E
MULATION
C
LIENTS
Display LEC
Operational
Parameters
Displays the LEC operational parameters for the specified bridge (refer to
Table 8-10). For more information see “LEC Parameters” on page 12-16.
Table 8-9
Task Actions
Menu
Sequence
Enter
Result
[5] le
[3] operational
[1] display
1
Bridge Number {0-3}
LEC operational information for
the specified bridge is displayed.
Table 8-10
LEC Operational Parameters
LEC Parameter
Description
Control-timeout
Timeout period used for timing out most
request/response control frame interactions.
VCC-timeout-period
An LEC should release any Data Direct VCC that has
not been used to transmit or receive any data frames
for the length of the VCC-timeout-period.
Aging-time
The maximum time that an LEC will maintain an entry
in its LE_ARP cache in the absence of a verification of
that relationship.
Forward-delay-time
The maximum time that an LEC will maintain an entry
for a non-local MAC address in its LE_ARP cache in the
absence of a verification of that relationship, as long as
the topology-change-flag is true.
Expected LE_ARP Resp
Time
The maximum time that the LEC expects an LE_ARP
request/response cycle to take. Used for retries and
verifies.
Topology-change-flag
Boolean indication that the LEC is using the
forward-delay-time instead of aging-time to age
non-local entries in its LE_ARP cache.
Flush-timeout
Time limit to wait to receive an LE_FLUSH response
after the request has been sent, before taking recovery
action.
Path-switching-delay
The time since sending a frame to the BUS after which
the LEC may assume that the frame has been either
discarded or delivered to the recipient.
Connection-completion-
timer
In Connection Establishment this is the time period in
which data or a READY_IND message is expected from
a Calling Party.
abtthgde.book Page 8 Tuesday, June 23, 1998 10:29 AM
