2N Netstar, Manual

Page: 241 / 282

241
2.
disabled for User while enabled with no timeout for user . After no answer or A B
call rejection by the external GSM extension, an SMS at no answer is sent
containing the text as defined in the bottom row of the configuration of user
. B
When the SMS at no answer is enabled for user too, an SMS at no answer is A
sent containing the text from the upper row of the configuration of user . A
Services
The Services subtag helps you create individual service settings, thus replacing the
global ones. You can modify such parameters as progress tones, timers and routers, or
activate the PIN request in the service settings. To disable individual settings push the
button. Remove individual setting
Recording
The whole tag is available on the user, group, virtual port and virtual port type levels
only.
You can set the call recording parameters in this tag. Find the tag in the Properties on
the user, group, virtual port and virtual port type levels.
Recording – specify the recording mode for the level.
Pattern length [ms] – set the time for which the recording ON/OFF pattern
characters are to be awaited. If a character comes after the timeout, it is
identified as invalid (the pattern is not recognised).
Default – settings from other hierarchical levels are used.
Disabled – disable call recording regardless of lower level settings.
Upon request – enable call recording activation/deactivation during the
call. The parameters Pattern length, ON pattern and OFF pattern are used.
Turn on at alerting – call recording is activated by ringing detection and
deactivated by the call end.
Turn on at connect – call recording is activated by the call connection and
deactivated by the call end.
ON pattern – define the recording ON pattern during the call. The parameter is
applied by PBX extensions only if the recording mode is active. Upon request
The default pattern is 1*.
OFF pattern – define the recording OFF pattern during the call. The parameter is
applied by PBX extensions only if the recording mode is active. Upon request
The default pattern is 3#.
Hang up at unsuccessful recording – use the parameter to enable call
termination in case call recording fails (due to an unavailable storage, invalid
licence, etc.).
The following parameters relate to the saved files with call records. If they are
inactive, create new properties of the object used. Thus, you add a row to the
Call recording logical storage.
Item lifespan [s] – set the storing time for a file with a call record. After the
time expires, items are deleted sequentially. The item lifespan is automatically
set to 10 years if this option is not selected.
Maximum count of items – set the count of records in a storage for an object.
After the limit is reached, no more calls are recorded unless deleting of oldest
files is enabled.
Usable space for all items – define some space in a storage to be reserved for
records of the given object. When the space is full, no more calls are recorded
unless deleting of oldest files is enabled.