2N Netstar, Manual

Page: 231 / 282

231
1.
Properties Tag
The tag is situated in the menus of all routing objects as mentioned above Properties
(Figure 1). By default, the properties are not set on all levels as they are unnecessary
for normal PBX operation. To set a parameter for an object, simply push the
Create
button. To cancel a parameter, push the button properties Reset default properties
. The tag consists of fourteen subtags, which are logically divided according Properties
to functions. Some are used only on certain levels because they have no sense on
others. The text below explains all the parameters available in the subtags.
Basic
The parameters of this subtag are mostly divided into sections according to their
functions:
No answer timeout [s] – use this parameter to set the maximum time of
alerting the called phone. After the timeout, the call establishing process is
terminated with the 'User not responding' cause and the calling user hears the
congestion tone. The default value is 180s. The maximum value is 1 hour.
Holdoff parameters
Call hold – use this option to enable holding of a call. The default value of this
parameter is (Hold enabled). YES
Hold tone – use this option to set the tone to be played to the user during call
holding by the other party. The default tone is the progress tone. Music on Hold
Maximum hold level – use this parameter to define the maximum count of held
calls per extension. Push the call holding button again to get connected to the
first held subscriber, push it once again to get connected to the second held
subscriber, and so on. If a held subscriber hangs up, the released position can be
used for another hold.
Transfer parameters
ICT enabled – (Implicit Call Transfer) – use this parameter to enable call transfer
via a connected terminal (phone). You can use one of the following options:
Blind transfer (with hang–up) – the call is not answered by the other
party before transfer. E.g. user calls to user . User answers the call A B B
and users and are talking with each other. User holds the call. User A B B
hears the Music on Hold and user establishes a new connection to user A B
. User does not answer the call and user terminates the call. User is C C B A
transferred to user and hears the alert tone instead of the Music on Hold. C
When user answers the call, users and can talk to each other. C A C
Transfer without hang–up – the call is answered by the other party before
transfer. E.g. user calls to user . User answers the call and users and A B B A B
are talking to each other. User holds the call. User hears the Music on Hold B A
and user establishes a new connection to user . User answers the call and B C C
user terminates the call. User is connected to user and they can talk to B A C
each other.
Transfer return timeout [ms] – use this parameter to define the timeout for
return from the blind transfer. After this timeout (if not answered), the call
returns to the extension that transferred it. The default value of this parameter is