ZyXEL Communications WX3100-TO Скачать руководство пользователя страница 29

Страница: 29 / 187

Chapter 2 Hardware

WX Series User’s Guide

• Repeater mode (modem/router to the WX Device)

1. Press the WPS button on the modem/router. Release it when the WPS LED blinks.
2. Press the WX Device

WPS

button once within 2 minutes to copy the WiFi settings from your modem/

router to the WX Device.
3. The Link LED lights up when the process is finished.

• Repeater mode (the WX Device to the WiFi client)

1. Press the WX Device

WPS

button twice within 8 seconds to copy the WiFi settings from the WX

Device to a WiFi client, such as your smartphone or laptop.
2. Wait until the WPS LED blinks.
3. Press the WPS button on the client within 2 minutes.

• Repeater mode (Downlink Daisy Chain For MPro Mesh)

1. Press the

rst WX Device

WPS

button twice within 8 seconds.

2. Press the

WPS

button once on the downlink WX Device within 2 minutes of each other.

Note: You must activate WPS in the WX Device and in another wireless device within two

minutes of each other.

Note: With WPS, WiFi clients can only connect to the 5 GHz or 2.4 GHz WiFi network using the

first 5 GHz or 2.4 GHz SSID on the WX Device (in AP or repeater mode).

2.6 RESET Button

If you forget your password or you cannot access the Web Configurator, you will need to use the

RESET

button at the back of the WX Device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously saved, the password will be reset to the default key on
the device label.

2.6.1 Using the RESET Button

Make sure the power LED is on (not blinking).

Press the

RESET

button for longer than five seconds to set the WX Device back to its factory-default

configurations.

Содержание WX3100-TO




























































































































































































Результаты поиска

Содержание WX3100-TO

Отзывы:

Похожие инструкции для WX3100-TO

Бренды по названию

Популярные бренды

ZyXEL Communications WX3100-TO, Руководство пользователя

Результаты поиска

Содержание WX3100-TO

Отзывы:

Похожие инструкции для WX3100-TO

Бренды по названию

Популярные бренды