WAP5805 User’s Guide
72
C
H A P T E R
11
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
•
•
Resetting the WAP5805 to Its Factory Defaults
11.1 Power, Hardware Connections, and LEDs
The WAP5805 does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor or cord included with the WAP5805.
2
Make sure the power adaptor or cord is connected to the WAP5805 and plugged in to an
appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or cord to the WAP5805.
4
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Disconnect and re-connect the power adaptor to the WAP5805.
5
If the problem continues, contact the vendor.
Содержание WAP5805
Страница 8: ...8 PART I User s Guide...
Страница 9: ...9...
Страница 30: ...30 PART II Technical Reference Expert Mode...
Страница 31: ...31...