ZyXEL Communications WAP5805, Руководство пользователя

Страница: 54 / 125

Chapter 8 Wireless LAN
WAP5805 User’s Guide
54
WPA2-PSK
Select WPA2-PSK from the Security Mode list.
Figure 32
Configuration > Network > Wireless LAN > More AP > Edit: WPA2-PSK
The following table describes the labels in this screen.
Security Mode Select WPA-PSK to enable data encryption.
Pre-Shared Key WPA-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key
Update Timer The Group Key Update Timer is the rate at which the AP sends a new group key out to
all clients.
The default is 3600 seconds (60 minutes).
Apply Click Apply to save your changes back to the WAP5805.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 21
Configuration > Network > Wireless LAN > More AP > Edit: WPA2-PSK
LABEL DESCRIPTION
Wireless Setup
Active Select this check box to activate and start the process.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical
English language keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a wireless client
cannot obtain the SSID through scanning using a site survey tool.
Intra-BSS
Traffic
Select this check box to enable the traffic for Intra-BSS.
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled,
wireless
clients can access the wired network and communicate with each other.
When Intra-BSS is
disabled, wireless clients can still access the wired network but
cannot communicate with each other.
Security
Table 20
Configuration > Network > Wireless LAN > More AP > Edit: WPA-PSK (continued)
LABEL DESCRIPTION