ZyXEL Communications WAP5805, Руководство пользователя

Страница: 33 / 125

Chapter 5 Access Point Expert Mode
WAP5805 User’s Guide
33
5.3.1 Configuring your WLAN, LAN and Maintenance Settings
• See Chapter 8 on page 46 and Chapter 10 on page 79 for information on the configuring your
wireless network and LAN settings.
• See Chapter 10 on page 65 for information on configuring your Maintenance settings.
5.4 Setting your WAP5805 to AP Mode
1
To set your WAP5805 to AP mode, see Section 2.1.3 on page 19 .
2
Connect your computer to the LAN port of the WAP5805.
3
The default IP address of the WAP5805 in AP mode is “192.168.1.2”. In this case, your computer
must have an IP address in the range between “192.168.1.3” and “192.168.1.254”.
4
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
Appendix A on page 77 for information on changing your computer’s IP address.
5
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.2” as the web address in your web browser.
6
Enter “1234” (default) as the password and click Login .
7
Type a new password and retype it to confirm, then click Apply . Otherwise, click Ignore .
8
The Easy mode appears. Click Expert Mode in the navigation panel.
5.5 AP Mode Status Screen
Click to open the Status screen.
Figure 17
Status Screen: Access Point Mode