ZyXEL Communications WAP5805, Руководство пользователя

Страница: 62 / 125

Chapter 9 LAN
WAP5805 User’s Guide
62
9.3 What You Need To Know
There are two separate IP networks, one inside the LAN network and the other outside the WAN
network as shown next.
Figure 39
LAN and WAN IP Addresses
The LAN parameters of the WAP5805 are preset in the factory with the following values:
• AP mode: IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits)
• Client mode: IP address of 192.168.1.10 with subnet mask of 255.255.255.0 (24 bits)
9.3.1 LAN TCP/IP
The WAP5805 has built-in DHCP server capability that assigns IP addresses and DNS servers to
systems that support DHCP client capability.
9.3.2 IP Alias
IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The WAP5805 supports three logical LAN interfaces via its single physical
Ethernet interface with the WAP5805 itself as the gateway for each LAN network.
If you select Obtain an IP Address Automatically in Configuration > Network > LAN > IP ,
the WAP5805 is assigned a dynamic unknown IP address. The default IP address of 192.168.1.2
for AP mode and 192.168.1.10 for CL mode will no longer work.
Figure 40
Local and dynamic IP Addresses
WAN
LAN
Internet
Local